SMSC LAN9311i - Manual (Page 399)

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i 399 Revision 1.4 (08-19-08)
DATASHEET
14.5.3.28 Switch Engine Ingress Rate Write Data Register (SWE_INGRSS_RATE_WR_DATA)
This register is used to write the ingress rate table registers.
Register #: 184Dh Size: 32 bits
BITS DESCRIPTION TYPE DEFAULT
31:16 RESERVED RO -
15:0 Data
This is the data to be written to the ingress rate table registers as specified
in the
Switch Engine Ingress Rate Command Register
(SWE_INGRSS_RATE_CMD) . Refer to Section 14.5.3.26.1, "Ingress Rate
Table Registers," on page 397 for details on these registers.
R/W 0000h