beautypg.com

Reverting to a previous firmware version – Fortinet FortiGate-800 User Manual

Page 96

background image

96

Fortinet Inc.

Changing the FortiGate firmware

System status

4

Make sure the FortiGate unit can connect to the TFTP server.
You can use the following command to ping the computer running the TFTP server.
For example, if the IP address of the TFTP server is 192.168.1.168:
execute ping 192.168.1.168

5

Enter the following command to copy the firmware image from the TFTP server to the
FortiGate unit:
execute restore image
Where is the name of the firmware image file on the TFTP server and
is the IP address of the TFTP server. For example, if the firmware image

file name is FGT_300-v250-build045-FORTINET.out and the IP address of the

TFTP server is 192.168.1.168, enter:

execute restore image FGT_300-v250-build045-FORTINET.out
192.168.1.168
The FortiGate unit uploads the firmware image file, upgrades to the new firmware
version, and restarts. This process takes a few minutes.

6

Reconnect to the CLI.

7

To confirm that the new firmware image is successfully installed, enter:
get system status

8

Use the procedure

“Manually initiating antivirus and attack definitions updates” on

page 119

to update antivirus and attack definitions, or from the CLI, enter:

execute updatecenter updatenow

9

To confirm that the antivirus and attack definitions are succesfully updated, enter the
following command to display the antivirus engine, virus and attack definitions version,
contract expiry, and last update attempt information.
get system objver

Reverting to a previous firmware version

Use the following procedures to revert your FortiGate unit to a previous firmware
version.

Reverting to a previous firmware version using the web-based
manager

The following procedures revert the FortiGate unit to its factory default configuration
and delete NIDS user-defined signatures, web content lists, email filtering lists, and
changes to replacement messages.

Before beginning this procedure you can:

• Back up the FortiGate unit configuration. For information, see

“Backing up system

settings” on page 108

.

• Back up the NIDS user-defined signatures. For information, see the FortiGate

NIDS Guide

• Back up web content and email filtering lists. For information, see the FortiGate

Content Protection Guide.