Setting authentication timeout, Adding user names and configuring authentication – Fortinet FortiGate-800 User Manual
Page 224
224
Fortinet Inc.
Setting authentication timeout
Users and authentication
This chapter describes:
•
Setting authentication timeout
•
Adding user names and configuring authentication
•
•
•
Setting authentication timeout
Authentication timeout controls how long authenticated firewall connections can
remain idle before users must authenticate again to get access through the firewall.
To set authentication timeout
1
Go to System > Config > Options.
2
In Auth Timeout, type a number, in minutes.
The default authentication timeout is 15 minutes.
Adding user names and configuring authentication
Use the following procedures to add user names and configure authentication.
This section describes:
•
Adding user names and configuring authentication
•
Deleting user names from the internal database
Adding user names and configuring authentication
To add a user name and configure authentication
1
Go to User > Local.
2
Select New to add a new user name.
3
Type the User Name.
The user name can contain numbers (0-9), uppercase and lowercase letters (A-Z,
a-z), and the special characters - and _. Other special characters and spaces are not
allowed.
4
Select one of the following authentication configurations:
Disable
Prevent this user from authenticating.
Password
Enter the password that this user must use to authenticate. The password
should be at least six characters long. The password can contain numbers
(0-9), uppercase and lowercase letters (A-Z, a-z), and the special characters
- and _. Other special characters and spaces are not allowed.