Fortigate mibs – Fortinet FortiGate-800 User Manual
Page 176
176
Fortinet Inc.
Configuring SNMP
System configuration
Figure 37: Sample SNMP configuration
FortiGate MIBs
The FortiGate SNMP agent supports FortiGate proprietary MIBs as well as standard
RFC 1213 and RFC 2665 MIBs. The FortiGate MIBs are listed in
Table 20
. You can
obtain these MIB files from Fortinet technical support. To be able to communicate with
the SNMP agent, you must compile all of these MIBs into your SNMP manager.
Your SNMP manager might already include standard and private MIBs in a compiled
database that is ready to use. You must add the Fortinet proprietary MIBs to this
database. If the standard MIBs used by the Fortinet SNMP agent are already
compiled into your SNMP manager you do not have to compile them again.
Table 20: FortiGate MIBs
MIB file name or
RFC
Description
fortinet-trap.mib
The Fortinet trap MIB is a proprietary MIB that is required for your SNMP
manager to receive traps from the FortiGate SNMP agent. For more
information about FortiGate traps, see
.
fortinet.mib
The Fortinet MIB is a proprietary MIB that includes detailed FortiGate
system configuration information. Add this MIB to your SNMP manager
to monitor all FortiGate configuration settings.
RFC-1213 (MIB II) The FortiGate SNMP agent supports MIB II groups with the following
exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11 and
6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.) do
not accurately capture all FortiGate traffic activity. More accurate infor-
mation can be obtained from the information reported by the Fortinet
MIB.
RFC-2665
(Ethernet-like
MIB)
The FortiGate SNMP agent supports Ethernet-like MIB information with
the following exception.
No support for the dot3Tests and dot3Errors groups.