Fortinet FortiAnalyzer 1000B - Manual

© Copyright 2008 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
30 September 2008
Visit these links for more information and documentation for your Fortinet product.
Technical Documentation - http://docs.forticare.com
Fortinet Knowledge Center - http://kc.forticare.com
Fortinet Technical Support - http://support.fortinet.com
•
•
•
Connecting
R
1000B
R
1000B
For future
use USB Ethernet
ports
Ethernet ports
Power supply
Console
connection
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
Power cable
connects to
power supply
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
Null modem
cable connects to serial
port on management
computer
FortiGate-30B
Tools and Documenation
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
QuickStart Guide
Welcome | Bienvenue | Willkommen | | | Bienvenido | Benvenuto
2 Mounting Slide Rails
R
1000B
Straight-through
Ethernet cable
Power Cable
Null-Modem Cable
(RS-232)
Package Contents
Connect the following to the FortiAnalyzer unit. Ensure the FortiAnalyzer unit is placed on a stable surface or install in a standard 19 inch rack. See
the FortiAnalyzer-1000B Rack Install Guide for details.
Insert a network cable to port 1.
Connect the other end of network cable to the network hub or switch.
Connect the AC Power Cord to the Power Supply.
Connect the Power Cord to a surge protected
power bar or power supply.
•
•
•
•
FortiAnalyzer-1000B
05-30006-0480-20080930
QuickStart Guide
Web-based manager
The FortiAnalyzer web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
add Fortinet devices and configure reports.
Requirements:
An Ethernet connection between the FortiAnalyzer unit and management computer.
A web browser such as FireFox or Internet Explorer on the management computer.
•
•
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiAnalyzer unit.
Requirements:
The DB9 serial connection between the FortiAnalyzer unit and management computer.
A terminal emulation application (HyperTerminal for Windows) on the management
computer.
•
•
Configuration Tools
LED State Description
Ports 1 to 4 Left LED
Green The correct cable is connected to the copper
10/100/1000 interface and the connected equip-
ment has power.
Ports 1 to 4 Right LED
Flashing Network activity at this interface.
Green The interface is connected at 1000 Mbps.
Yellow The interface is connected at 100 Mbps.
Off The interface is connected at 10 Mbps.
Connector Type Speed Protocol Description
Ports 1 to 4 RJ-45 10/100/1000
Base-T
Ethernet Copper gigabit connection to 10/100/1000 copper networks.
CONSOLE DB9 9600 8/N/1 RS-232 serial Optional connection to the management computer. Provides access to
the command line interface (CLI).
USB USB USB Optional connection to a USB key for firmware backup and installation.