Fortinet FortiGate-800 - Manual (Page 39)

Getting started FortiGate model maximum values matrix
FortiGate-800 Installation and Configuration Guide
39
Front keypad and LCD
If you are configuring the FortiGate unit to operate in NAT/Route mode, you can use
the control buttons and LCD to add the IP address of the FortiGate interfaces as well
as the external default gateway.
If you are configuring the FortiGate unit to operate in Transparent mode, you can use
the control buttons and LCD to switch to Transparent mode. Then you can add the
management IP address and default gateway.
FortiGate model maximum values matrix
Table 9: FortiGate maximum values matrix
FortiGate model
50 60 100 200 300 400 500 800 1000 3000 3600 4000
Routes 500 500 500 500 500 500 500 500 500 500 500 500
Policy routing
gateways 500 500 500 500 500 500 500 500 500 500 500 500
Administrative
users 500 500 500 500 500 500 500 500 500 500 500 500
VLAN
subinterfaces N/A N/A N/A 4096* 4096* 4096* 4096* 4096* 4096* 4096* 4096* 4096*
Zones N/A N/A N/A 100 100 100 100 100 200 300 500 500
Virtual domains N/A N/A N/A 16 32 64 64 64 128 512 512 512
DHCP address
scopes 32 32 32 32 32 32 32 32 32 32 32 32
DHCP reserved
IP/MAC pairs 10 20 30 30 50 50 100 100 200 200 200 200
Firewall policies 200 500 1000 2000 5000 5000 20000 20000 50000 50000 50000 50000
Firewall
addresses 500 500 500 500 3000 3000 6000 6000 10000 10000 10000 10000
Firewall address
groups 500 500 500 500 500 500 500 500 500 500 500 500
Firewall custom
services 500 500 500 500 500 500 500 500 500 500 500 500
Firewall service
groups 500 500 500 500 500 500 500 500 500 500 500 500
Firewall recurring
schedules 256 256 256 256 256 256 256 256 256 256 256 256
Firewall onetime
schedules 256 256 256 256 256 256 256 256 256 256 256 256
Firewall virtual
IPs 500 500 500 500 500 500 500 500 500 500 500 500
Firewall IP pools 50 50 50 50 50 50 50 50 50 50 50 50
* Includes the number of physical interfaces.