Sample wiring topologies, Wiring hints, Wiring connections – Baseline Systems BaseStation 6000 User Manual

Page 14: Figure 1 – straight run, Figure 2 – star, Figure 3 – combination topology, Figure 4 – complete loop, Sample wiring, Topologies th, E 6)

BaseStation 6000 Site Controller Manual

6 |

P a g e

Sample Wiring Topologies

Figure 1 – Straight Run

Figure 2 – Star

Figure 3 – Combination Topology

Figure 4 – Complete Loop

Wiring Hints

For wiring specifications, refer to the Two-Wire Tech Spec on Baseline’s web site (

). Use the

appropriate wire type for your project. Typical PVC irrigation wire, without a second layer of insulation is not suitable. If you use

an unspecified wire type, it will void your warranty. Make sure your backbone wire and field wires are two different colors.

Wiring Connections

Use wire connections that are DBR/Y-6 or equivalent on the two-wire side and on the valve side. Install all connections

according to their manufacturer’s instructions.

Note: Two-wire systems have constant power running through them. If a connection is not waterproof or has any contact with

earth, the connections will quickly corrode. Your warranty will be voided if you fail to use the wire connections as described in

the specification.