John Deere OMPC20964 - Manual (Page 97)

Original GreenStar Display—RTK
OUO6050,0000C40 –19–23SEP07–2/5
RTK SECURE NETWORK will appear in cell “F”. Select
letter button “F”
Entering RTK vehicle (rover) serial numbers
Press letter button next to ROVER # (1-99) and enter
desired location number to store the RTK vehicle receiver
serial number. There are 99 slots available.
Press letter button next to ROVER HARDWARE SN and
enter serial number of RTK vehicle StarFire receiver.
NOTE: Original GreenStar Display - The six digit
hardware serial number can be found on INFO –
GPS – PAGE 3. Go to display in RTK vehicle:
Press INFO >> STARFIRE iTC >> press PAGE
button until you reach PAGE 3.
NOTE: GreenStar 2100/2600 Display – The six digit
hardware serial number can be found on
STARFIRE iTC - ACTIVATIONS tab. Go to
display in RTK vehicle: Press MENU >>
STARFIRE iTC >> ACTIVATIONS tab.
Rover Access List (RAL)
Screen: SETUP – RAL
Press: SETUP >> STARFIRE iTC >> DIFF
CORRECTION SETUP >> RTK SETUP >> RTK SECURE
NETWORK >> DISPLAY AUTHORIZED LIST.
This displays the RTK vehicle receiver serial number and
location it is stored. Only the serial numbers on the RAL
will be able to receive RTK corrections from the base
station when RTK Network is in SECURE mode (see
Security Mode section below).
Press PAGE button to view subsequent pages of the RAL.
RTK Network Operating Mode
Screen: SETUP - RTK
Press: SETUP >> STARFIRE iTC >> DIFF
CORRECTION SETUP >> RTK SETUP >> RTK SECURE
NETWORK >> RTK NETWORK IS CURRENTLY.
30-9
121907
PN=97
Continued on next page