John Deere OMPC20964 - Manual (Page 67)

Original GreenStar Display—StarFire iTC
OUO6050,000225C –19–14NOV06–1/1
QuickStart Setup
JOHN DEERE
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
SETUP
JOHN DEERE
QuickStart Mode
AUTOMATIC OFF
StarFire Receiver
QuickStart Setup
A
B
C
D
E
F
G
GPS
GPS
SETUP
PC9561
–UN–06NOV06
SETUP - GPS
A—StarFire Receiver QuickStart Setup
B—QuickStart Mode, Automatic, Off
C——
D——
E——
F——
G—Return to GPS Setup
Screen: SETUP - GPS
Press: SETUP >> STARFIRE RECEIVER >>
QUICKSTART SETUP
QuickStart reduces amount of time required before full
accuracy is achieved. If QuickStart is activated (automatic
mode) and receiver has SF2 when it is powered down, a
position is saved for future QuickStart. If power is restored
to receiver within time period defined under HOURS ON
AFTER SHUTDOWN, QuickStart won’t be needed since
receiver power was never disrupted. If duration has
exceeded HOURS ON AFTER SHUTDOWN, QuickStart
will be initiated. Saved position will be used to bypass
startup warm up period that is usually required. Receiver
cannot move while this QuickStart is taking place. It may
take up 6 minutes for QuickStart to complete. User will be
notified on screen when it’s done.
To activate automatic mode Press letter button next to
QUICKSTART MODE to toggle between AUTOMATIC
and OFF.
25-8
121907
PN=67