John Deere OMPC20964 - Manual (Page 32)

GS2 Display—StarFire iTC
OUO6050,0000DAE –19–18OCT07–2/2
Satellite PREDICTOR uses three colors to represent
levels of GPS accurancy.
• Green = PDOP < =2.5 and VDOP <=2.0 with 7 or
more satellites
• Yellow = PDOP between 2.5 and 4.0 and VDOP
between 2.0 and 3.0 with 5 to 6 satellites
• Red = PDOP > =4.0 and VDOP >=3.0 or number of
satellites is < 4
OUO6050,0002249 –19–14NOV06–1/1
DIAGNOSTIC softkey
PC8663 –UN–05AUG05
MENU button
PC8659 –UN–05AUG05
STARFIRE ITC button
PC8683 –UN–05AUG05
DIAGNOSTIC softkey
The StarFire iTC - Diagnostic screen contains three tabs:
READINGS tab
DATA LOGS tab
READINGS tab has detailed information about receiver.
• Unswitched voltage
• Switched voltage
• CAN High voltage (Vehicle Bus)
• CAN Low voltage (Vehicle Bus)
• Software Part Number
• Software Version Number
• Hardware Part Number
• Hardware Serial Number
• Receiver Hours (h)
The following reading will only appear when receiver has
a RTK activation.
• RTK Software Number (RTK Radio Software Version)
• RTK Serial Number (RTK Radio Serial Number)
• RTK Status
• RTK Search Time (sec)
• RTK Satellites in Search (above 10 degrees elevation)
DATA LOGS tab has graphed GPS data, logged over the
previous 60 minutes.
15-24
121907
PN=32