Rtk base station setup – John Deere OMPC20964 User Manual
Page 118
![background image](/manuals/132814/118/background.png)
RTK Base Station Setup
OUO6050,0002277
–19–27NOV06–2/6
PC8743
–UN–01SEP05
PC8744
–UN–01SEP05
Even though the multipath signal may be reflected in
below the 7 degree elevation mask, the receiver may
still use this message because the time coded
message tell the receiver that the satellite position is
above 7 degrees (i.e. Sat 1; Elev. 35 degrees, Azimuth
255 degrees).
Both the roof of the car and the building are causing
multipath to occur at the base station receiver. The
signals is bounce along the car or building and enter
the receiver at a slight delay from when the direct
satellite message is received.
Continued on next page
35-11
121907
PN=118