John Deere OMPC20964 - Manual (Page 135)

RTK Base Station Setup
OUO6050,0002282 –19–25NOV06–1/1
Utilizing The RTK Extension Harness
PC8762
–UN–16SEP05
A—Radio mounted on tower
B—Base Station Receiver
This base station setup allows you to mount the receiver
at a secure location and mounting the radio, with antenna,
to an elevated position, and utilizing 91 m (300 ft) of
RS232 cable between the receiver and radio.
OUO6050,0002283 –19–25NOV06–1/1
Utilizing A Repeater
PC8761
–UN–16SEP05
This base station setup allows the placement of the
receiver and radio in a location with no obstructions. A
repeater, with its own power source, is placed at an
elevated location. The base station radio sends its signal
up to the repeater and the repeater then sends out the
signal.
NOTE: With this type of base station setup, no other
repeaters can be used with the base station.
35-28
121907
PN=135