Overview: sf2/rtk activations, sf2 subscription – John Deere OMPC20964 User Manual
Page 64
Original GreenStar Display—StarFire iTC
OUO6050,000225B
–19–19NOV06–1/3
Overview:
SF2/RTK Activations,
SF2 Subscription
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
INFO
JOHN DEERE
Activations SF1, SF2 Ready, RTK
SF2 License Yes
SF2 End Date 10/17/2114
GPS
A
B
C
D
E
F
G
Receiver Hours 2016.7
Switched Volt
Unswitched Volt
CAN High Volt
CAN Low Volt
PAGE 3
Hardware P N 1 2 3 4 5 6 7 8 9 0
Hardware SN 200500
SW App Ver 1.00A
SW Loader Ver 000.XXX
12.6
12.6
2.4
2.6
PC9573
–UN–06NOV06
INFO - GPS - PAGE 3
A—Activations SF1, SF2 Ready, TRK
SF2 License
B—SF2 End Date
Receiver Hours
C—Switched Volt
Unswitched Volt
D—CAN High Volt
CAN Low Volt
E—Hardware Part Number
Hardware Serial Number
F—Software Application Version
Software Loader Version
G——
StarFire iTC is offered in 2 configurations: SF1 World
Solution and SF2 Ready.
SF1 World Solution: SF1 is a no-charge satellite-based
differential correction signal offered exclusively by John
Deere, delivering accuracy adequate for non row crop
applications. SF1 StarFire iTC can be upgraded to
SF2-Ready by visiting your John Deere dealer, calling
Customer Care Center, or visiting StellarSupport and
purchasing SF2 Ready activation.
NOTE: Serial port GPS information (NMEA) is only
outputted for SF1 when connected to a GreenStar
system.
SF2 Ready: SF2 is a +/- 10 cm (4 in.) pass to pass
differential correction signal provided exclusively by John
Deere. While StarFire iTC can be ordered SF2 Ready,
SF2 Ready activation must be obtained by visiting
www.StellarSupport.com (COMAR order number and
receiver serial number are needed) and manually entered
into receiver. Once activation has been entered, SF2
license can be purchased for either a 3, 6, 12, 24, or 36
month period.
NOTE: StarFire iTC must be SF2 Ready prior to
upgrading receiver to RTK.
RTK: RTK is the highest accuracy correction signal. It
requires use of a local base station and radio
communication equipment. Each receiver used in the RTK
system must be activated for RTK. This activation exists
for the life of the receiver and can be transferred.
Continued on next page
25-5
121907
PN=64