John Deere OMPC20964 - Manual (Page 48)

GS2 Display—RTK
OUO6050,0000DAC –19–23SEP07–1/1
Vehicle Repeater
PC9148
–UN–20APR06
Press: MENU button >> StarFire iTC button >> RTK
Softkey
Select “Vehicle Repeater” from Operating Mode list
box.
In this mode the RTK vehicle radio not only receives
messages but also rebroadcasts them (similar to a
RTK repeater) to other RTK vehicles in close
proximity.
NOTE: Vehicle Repeater is identical to the Vehicle
mode with the addition of having the radio
rebroadcast the RTK messages.
The Vehicle Repeater mode allows an RTK vehicle to
function normally as an RTK vehicle while also
transmitting the base correction signal to another RTK
vehicle that does not have line-of-sight to the base
station.
The ‘Vehicle Repeater’ needs to be between the base
station and the ‘Vehicle’. The ‘Vehicle Repeater’ must
be able to communicate with the base station. The
‘Vehicle’ must then have either line of sight
communication to the base station or ‘Vehicle
Repeater’.
IMPORTANT: There should be only ONE Vehicle
Repeater or Repeater in the same
vicinity with the same Network ID.
Therefore, a repeater cannot be used
in a ’’daisy chain,’’ repeating the
signal from one repeater to another.
20-5
121907
PN=48