John Deere OMPC20964 - Manual (Page 51)

GS2 Display—RTK
OUO6050,0000C23 –19–18OCT07–3/3
NOTE: Display can be removed while survey is in
progress.
After 24 hour survey is complete, base station will
automatically store surveyed coordinates and begin
transmitting corrections.
IMPORTANT: Manually record coordinates and
elevation and store in safe location.
These coordinates may be used to
enter previously surveyed base
station location into different
receiver.
NOTE: Absolute Base Mode, coordinates may be
manually entered, if known from previous
survey. See Known Location section below.
Known Location
Press START button located under Edit Stored RTK
Base.
1. Select desired Base Location from drop-down box
(1-20)
2. Select Base Latitude – enter value (deg)
3. Select Base Longitude – enter value (deg)
4. Select Base Altitude – enter value (ft)
5. Press ENTER button
20-8
121907
PN=51