Original greenstar display—rtk, Operating mode, Section 30 – John Deere OMPC20964 User Manual
Page 89
Original GreenStar Display—RTK
OUO6050,0000C3C
–19–17OCT07–1/2
Operating Mode
SETUP
JOHN DEERE
RTK Operating Mode
VEHICLE
RTK
A
B
C
D
E
F
G
RTK Radio
Channel (1-14)
RTK Network ID
(1-4000)
Configure
Repeater Radio
1
1
PC9577
–UN–06NOV06
SETUP - RTK
A—RTK Operating Mode
B—RTK Radio Channel
C—RTK Network ID
D——
E—Configure Repeater Radio
F——
G——
IMPORTANT: Before starting SETUP procedures,
enter RTK activation number, see Enter
RTK Activation section.
NOTE: Radio can function in four different modes:
• Vehicle
• Quick Survey Base Mode
• Absolute Base Mode
• Off
Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time Slot.
Screen: SETUP - RTK
Press: SETUP >> STARFIRE RECEIVER >> DIFF
CORRECTION SETUP >> RTK SETUP
Press letter button next to RTK OPERATION MODE and
toggle to desired selection.
Suggested Base Station Mode For Operation
Quick Survey Base Mode
Absolute Base Mode
Custom Operations
Drip Tape
Tillage
Strip Till
Broad-acre Seeding
Controlled Traffic
Row Crop
Vehicle Mode:Select for receiver on vehicle.
Vehicle Repeater Mode:This mode should only be used
in situations where multiple RTK vehicles are operating in
the same field and due to the terrain, line-of-sight is
obstructed between one of the vehicles and the base
station.
Continued on next page
30-1
121907
PN=89