John Deere OMPC20964 - Manual (Page 53)

GS2 Display—RTK
OUO6050,0000C24 –19–18OCT07–2/2
To configure radio as repeater:
Press: MENU button >> STARFIRE ITC button >> RTK
softkey
Select RTK Operating Mode (Vehicle, Quick Survey Base
or Absolute Base)
NOTE: A radio can be configured as a repeater from any
RTK Operating Mode.
1. Disconnect original radio from receiver
2. Connect radio to be configured to receiver RTK
harness.
3. Check that the radio serial number and software
version are displayed.
4. Check that base station, vehicle, and repeater have
same Frequency, Network ID and Time Slot.
5. Press START button located under Configure Repeater
Radio
6. Radio will configure as repeater
7. Disconnect repeater radio from receiver and wiring
harness
8. Reconnect original radio
20-10
121907
PN=53