John Deere OMPC20964 User Manual
Page 141
![background image](/manuals/132814/141/background.png)
Troubleshooting and Diagnostics
OUO6050,0002236
–19–25NOV06–2/5
Control Unit
Add.
Description
Details
iTC
020
DISPLAY: Angle of side to side receiver tilt.
Shown in degrees.
iTC
021
DISPLAY: Degrees per second of heading change.
Shown in degrees/second
iTC
022
DISPLAY: Current differential license
0 = StarFire license not processed
1 = StarFire factory license valid
2 = StarFire license valid
3 = StarFire license expired
4 = StarFire license pending
5 = StarFire license grace period valid
6 = StarFire license validation error
7 = StarFire license out of sequence
8 = StarFire license duration invalid
9 = StarFire license type invalid
10 = StarFire receiver needs position
11 = StarFire license grace period empty
12 = StarFire current license is already authentic
13 = StarFire license is retrograded
14 = StarFire license (disabled)
15 = StarFire license (disabled) is cancelled
16 = StarFire license is currently disabled unable to
disable
17 = Invalid StarFire receiver
18 = StarFire correction license has invalid level
19 = StarFire correction numbers already entered
20 StarFire correction license cancelled
21 No StarFire correction license (unable to cancel)
22 = StarFire differential correction license needs
activation
23 = StarFire differential license requires activation
24 = StarFire license process out of sequence
iTC
023
DISPLAY: Deactivation date of corrections license
Shown in days, months, years
iTC
024
DISPLAY: Remaining GPS days of corrections
Shown in number of license days left before
license
deactivation of correction signal
iTC
025
DISPLAY: The voltage level of the 12V switched
Shown in VDC
power supply to the unit.
iTC
026
DISPLAY: The voltage level of the 12V unswitched
Shown in VDC
power supply to the unit.
iTC
027
DISPLAY: The voltage level of CAN HIGH line.
Shown in VDC
iTC
028
DISPLAY: The voltage level of CAN LOW line.
Shown in VDC
iTC
029
DISPLAY: Hours of operation
Shown in number of hours
iTC
30
DISPLAY/MODIFY: Hours of navigation after key off
0 hours
3 hours
6 hours
12 hours
24 hours
iTC
32
DISPLAY/MODIFY: Continue navigation from last
0 = No
known position.
1 = Yes
iTC
034
DISPLAY/MODIFY: Distance from top of receiver
Shown in centimeters
dome to ground.
40-5
121907
PN=141
Continued on next page