beautypg.com

Repeater – John Deere OMPC20964 User Manual

Page 102

background image

Original GreenStar Display—RTK

OUO6050,0002272

–19–25NOV06–1/1

Repeater

PC9736

–UN–17OCT07

SETUP - RTK

A—RTK Operating Mode
B—RTK Time Slot
C—RTK Network ID
D——
E—Radio and Repeater Configuration
F——
G—Return to Differential Corrections Setup

NOTE: The radio can be configured to act separately as

repeater. A repeater is required if obstructions (i.e.
trees, hills, etc.) exist between base station and
vehicle(s).

A repeater consists of:

Radio (configured as a repeater)

Harness

Mounting Bracket

12 Volt Power Source

To configure radio as repeater:

Screen: SETUP - RTK

Press: SETUP >> STARFIRE RECEIVER >> DIFF
CORRECTION SETUP >> RTK SETUP

1. Connect radio to receiver RTK harness.

2. Check that receiver has GPS position calculated.

3. Check that base station, vehicle, and repeater have

same Frequency, Network ID and Time Slot.

4. Press letter button next to CONFIGURE REPEATER

RADIO.

5. Radio will configure as repeater.

6. Disconnect repeater from receiver and wiring harness.

7. Reconnect original radio.

30-14

121907

PN=102