Declaration of conformity – John Deere OMPC20964 User Manual
Page 152
![background image](/manuals/132814/152/background.png)
Specifications
OUO6050,0000D9B
–19–17OCT07–1/1
Declaration of Conformity
PC7072B
–UN–05OCT07
John Deere Ag Management Solutions
4140 NW 114th Street
Urbandale, IA 50322
The following GREENSTAR System Components comply
with the EU electromagnetic compatibility provisions in
directive 2004/108/EC. These components were assessed
using the acceptance criteria defined in the harmonized
standard ISO 14982:1998.
• Original GreenStar Display
• Mobile Processor
• GreenStar Display 2100 & 2600
• Display Control
• StarFire iTC Receiver
• RTK Radio
• AutoTrac Universal Steering Kit
• GS2 Rate Controller
• iTC Power Module
26 September 2007
OUO6050,0000D9C
–19–04OCT07–1/1
Safety Note Regarding the Subsequent Installation of Electrical and Electronic
Appliances and/or Components
The machine is equipped with electronic components
whose function may be influenced by electromagnetic
radiation from other appliances. Such influences may
be hazardous, so take the following safety instructions
into account:
If electrical and electronic appliances are subsequently
installed on the machine and connected to the onboard
system, the user must verify whether the installation
affects the electronics or other components. This
applies particularly to:
• Personal Computer
• GPS (Global Positioning System) receiver
Subsequently installed electrical/electronic components
must comply with all relevant EMC directives and be
CE marked.
Wiring, installation and maximum permissible current
supply must be as stated in the installation instructions
of the machine manufacturer.
45-3
121907
PN=152