beautypg.com

Rtk network configuration – John Deere OMPC20964 User Manual

Page 52

background image

GS2 Display—RTK

OUO6050,0000C24

–19–18OCT07–1/2

RTK Network Configuration

IMPORTANT: Anytime the radio is reconfigured or

changed, power must be cycled at the
GPS receiver before continuing.

Time Slot - RTK

NOTE: 10 Time Slots are available. The default time slot

is 1.

Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time Slot.

Press input box and enter value (1 - 10)

The time slot may be changed if other RTK systems are
operating in area interference is causing decreased base
station communication performance.

Network ID – RTK

NOTE: 4001 network ID’s are available, default ID is 1.

Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time Slot.

Press input box and enter value (1 - 4000)

Network ID for base station and vehicle receiver must
match. If more than one base station with same Network
ID numbers are within range, vehicle may lock on to either
one of the base stations. To prevent this from happening,
be sure to use unique network ID.

Repeater – RTK

NOTE: Radio can be configured to act separately as

repeater. A repeater is required if obstructions (i.e.
trees, hills, etc) exist between base station and
vehicle(s).

A repeater consists of

• Radio (configured as a repeater)

• Harness

• Mounting Bracket

• 12 volt Power Source

20-9

121907

PN=52

Continued on next page