HP LC 2000 - Manual (Page 92)

Chapter 8 Rack-Mounting the HP NetServer
84
#
#
#
#
#
"#"
#
Bottom of
HP NetServer
Mark this face of the
left-front and
right-front columns.
Right Left
Front of
Rack
represents
the EIA unit
numbers on the
rack columns.
14th Hole
From Bottom
2nd Hole
From Bottom
Figure 8-3. Location Marks on the Rack’s Front Columns
5. Turn the template over and use it to mount rack nuts (at 7th and 9th holes)
on the left-rear and right-rear rack columns.
The template provides you with the nut placement locations. If you don’t
have the template, Figure 8-4 shows rack nut placement for the two rear
rack columns.
"#"
#
#
#
#
#
9th Hole
From Bottom
7th Hole
From Bottom
represents
the EIA unit
numbers on the
rack columns.
Left Right
Rear of
Rack
Attach nuts to this face
of the rear columns.
Bottom of
HP NetServer
Figure 8-4. Rack Nut Locations on the Rack’s Rear Columns