HP LC 2000 - Manual (Page 170)

Appendix A Specifications
162
Power Supply
AC Voltage selection for this NetServer is automatically determined by the power
supply.
Table A-3. Power Supply Requirements (Single Unit)
AC Input Power (50/60 Hz)
100 to 127 VAC, 5.5 A
200 to 240 VAC, 2.6 A
Maximum Continuous
Input Power
540 watts maximum
Output Power
349 watts maximum
The power cord set found in your shipping box has been approved for use in the
country where the NetServer was purchased. If any other power cord set is used, it
must meet appropriate safety requirements in the country in which the NetServer
is to be used.
Table A-4. General Cord Set Requirements
250 VAC, 10 A Cord set
(Approved or
recognized by
safety agency in
country of use.
125 VAC, 10 A
Maximum length 2.4 m (8 ft)