HP LC 2000 - Manual (Page 87)

79
8 Rack Mounting the HP NetServer
Introduction
This chapter tells how to mount the HP NetServer in an HP System/E or System/U
rack. The illustration below shows the characteristics of the System/E and
System/U racks. If you have the older HP Systems rack, see Chapter 13,
"Alternative Rack Mounting," for instructions. (If you are mounting the NetServer
in a non-HP rack, refer to the separate rack-mounting guide for third-party racks.
It is packed in the accessories tray in the HP NetServer’s shipping box.)
a
b
d
e
Characteristics of
System/E and
System/U Racks:
a. 5-Cornered Columns
b. Full Panel Vent
c. "HP Rack System/E" or
"HP Rack System/U"
Name Plate
d. Numbered EIA Units
e. Anti-Tip Foot Extends
Out Front or Back
c
Figure 8-1. HP System/E and System/U Rack Features