HP LC 2000 - Manual (Page 33)

Chapter 3 Opening and Closing the HP NetServer
25
9. Unscrew the slide securing screw (2) on each bracket securing the chassis
to the column adapter on each side of the rack. See Figure 3-3.
10. Press in on each blue Slide Release button (2) with both hands to slide the
HP NetServer out of the rack. See Figure 3-3.
Slide Securing Screws (2)
Hinge Pins(3) Handles(2)
Figure 3-3. Releasing the Securing Buttons
11. Pull the NetServer out of the rack until it snaps into the safety locks in each
slide with a click. See Figure 3-4.