HP LC 2000 User Manual

Page 83

Text mode
Original mode

Chapter 7

Installing Additional Processors

NOTE

Some processor speeds listed in Table 7-1 may not be supported. For the

latest support information, visit the HP web site:

http://www.hp.com/go/netserver

NOTE

The System board is shown removed from the HP NetServer
for simplicity in the following figures, but it is not necessary to
remove the system board to install the new processor module
or the VRM.

8. Loosen the thumbscrew on the processor cage cover, and lift off the cover

as shown in Figure 7-3.

Processor Cage
Cover

Figure 7-3. Removing Processor Cage Cover

This manual is related to the following products:

LC 2000R