Advanced printing tasks, Using features in the printer driver – HP 4100TN User Manual
Page 67
EN
Advanced printing tasks 65
Advanced printing tasks
This section will help you take full advantage of the printer’s features.
Using features in the printer driver
When you print from a software application, many of the printer’s
features are available from the printer driver. To access Windows
printer drivers, see “Access the Windows printer driver” on page 36.
Note
Certain printer features might not be available with all drivers. Check
the drivers for available options.
Settings in the printer driver and software application generally override
control panel settings. (Software application settings generally override
printer driver settings.)
Printer collation
The Printer Collation feature, only available with a minimum of 32 MB
of RAM or a hard disk accessory, allows multiple original prints
(mopying) that provides you the following advantages:
●
reduces network traffic
●
faster return to application
●
all documents are original
Note
See the application or printer driver online help for specific steps.
RIP ONCE
RIP ONCE allows the print job to be processed one time at the
printer. The RIP ONCE capability creates an image of the page then
saves a compressed image of the page into memory. RIP ONCE is
enabled when a minimum of 32 MB of RAM or a hard disk accessory
is installed in the printer. Pages are printed by decompressing page
images without pausing to process the print job again. The print job
will print exactly the same every time because the compressed image
is not dependent on any other printer data.