HP 4100TN - Manual (Page 32)

30 Chapter 1 - Printer basics EN
Control panel keys
Key Function
G O • Places the printer either online or offline.
• Prints any data residing in the printer’s buffer.
• Allows the printer to resume printing after being offline. Clears most
printer messages and places the printer online.
• Allows the printer to continue printing with an error message such as
TRAY
x LOAD [TYPE] [SIZE]
or
UNEXPECTED PAPER SIZE
.
• Confirms a manual feed request if tray 1 is loaded and
TRAY 1
MODE=CASSETTE
has been set from the Paper Handling Menu in the
printer’s control panel.
• Overrides a manual feed request from tray 1 by selecting paper from the
next available tray.
• Exits the control panel menus. (To save a selected control panel setting,
first press S ELECT .
C ANCEL J OB Cancels the print job that the printer is processing. (Press C ANCEL J OB only
once.) The time it takes to cancel depends on the size of the print job.
M ENU Cycles through the control panel menus. Press the right side of the key to
move forward or the left side of the key to move backward.
I TEM Cycles through the items in the selected menu. Press the right side of the
key to move forward or the left side of the key to move backward.
-V ALUE + Cycles through the values in the selected menu item. Press + to move
forward or - to move backward.
S ELECT • Saves the selected value for that item. An asterisk (*) appears next to the
selection, indicating that it is the new default. Default settings remain
when the printer is switched off or reset (unless you reset all factory
defaults from the Resets Menu).
• Prints one of the printer information pages from the control panel.