HP 4100TN - Manual (Page 221)

EN Configuration Menu 219
Configuration Menu
Items in this menu affect the printer’s behavior. Configure the printer
according to your printing needs.
Configuration Menu
Item Values Explanation
POWERSAVE TIME=
30 MINUTES
1 MINUTE
15 MINUTES
30 MINUTES
1 HOUR
2 HOURS
4 HOURS
Set how long the printer remains idle before it
enters PowerSave mode.
PowerSave mode does the following:
• minimizes the amount of power consumed
by the printer when it is idle
• reduces wear on the printer’s electronic
components (turns off the display’s
backlight)
When you send a print job, press a control
panel key, open a paper tray, or open the top
cover, the printer automatically comes out of
PowerSave mode.
For further information about PowerSave
mode, see
POWERSAVE
in the “Resets Menu”
on page 223.)
TONER LOW=
CONTINUE
CONTINUE
STOP
Determine how the printer behaves when toner
is low. The message first appears when about
15% of the toner remains in the cartridge
(about 1,500 pages remaining for the 10,000-
page cartridge and about 900 pages remaining
for the 6,000-page cartridge at 5% page
coverage).
CONTINUE
: The printer will continue to print
while the message displayed.
STOP
: The printer will stop and wait for further
action.
For more information, see “Toner low and toner
out conditions” on page 87.
TONER OUT=
STOP
CONTINUE
STOP
Determine how the printer behaves when toner
is out. The message first appears when the
toner cartridge is out of toner.
CONTINUE:
The printer will continue to print
with the message displayed.
STOP:
The printer will stop printing and further
action is required.
For more information, see “Toner low and toner
out conditions” on page 87.