HP 4100TN - Manual (Page 227)

EN EIO Menu 225
EIO Menu
The EIO (enhanced input/output) Menu appears only when an EIO
device is installed in an EIO slot on the printer (such as an HP
JetDirect print server). The items in the menu depend on the
particular accessory product installed. If the printer contains an HP
JetDirect print server EIO card, you can configure basic networking
parameters using the EIO Menu. These and other parameters can
also be configured through HP Web JetAdmin.
EIO Menu
Item Values Explanation
CFG NETWORK=NO NO
YES
Select whether or not you want to access the
HP JetDirect menu.
NO
: Bypass the HP JetDirect menu.
YES
: Access the HP JetDirect Menu. You must
change this to
YES
each time you want to
access the menu.
IPX/SPX=ON ON
OFF
Select whether the IPX/SPX protocol stack (in
Novell NetWare networks, for example) is
enabled (on) or disabled (off).
DLC/LLC=ON ON
OFF
Select whether the DLC/LLC protocol stack is
enabled (on) or disabled (off).
TCP/IP=ON ON
OFF
Select whether the TCP/IP protocol stack is
enabled (on) or disabled (off).
ATALK=ON ON
OFF
Select whether the Apple EtherTalk protocol
stack is enabled (on) or disabled (off).