HP 4100TN - Manual (Page 224)

222 Appendix B - Control panel menus EN
I/O Menu
Items in the I/O (input/output) Menu affect the communication
between the printer and the computer.
I/O Menu
Item Values Explanation
PARALLEL ADV
COMMUNICATN=ON
ON
OFF
Turn the bidirectional parallel communication
on or off. The default is set for a bidirectional
parallel port (IEEE-1284).
This setting allows the printer to send status
readback messages to the computer. (Turning
the parallel advanced functions on might slow
language switching.)
PARALLEL HIGH
SPEED=YES
YES
NO
Select the speed at which data is transmitted
to the printer.
YES
: The printer accepts faster parallel
communications used for connections with
newer computers.
NO
: The printer accepts slower parallel
communications used for connections with
older computers.
I/O TIMEOUT=
15 SECONDS
5
to
300
Select the I/O timeout period in seconds. (I/O
timeout refers to the time, measured in
seconds, that the printer waits before ending a
print job.)
This setting allows you to adjust timeout for
best performance. If data from other ports
appear in the middle of your print job, increase
the timeout value.
Press -V ALUE + once to change settings by
increments of 1, or hold down -V ALUE + to scroll
by increments of 10.