beautypg.com

HP 4100TN User Manual

Page 121

background image

EN

Understanding printer messages 119

TRAY 1 SIZE =

[xxxx]

The printer is asking what size of paper has been loaded in tray 1. In
response, you can take either of the following actions:

• press

S

ELECT

to accept the current paper size

• press

-V

ALUE

+

to change the size and then press

S

ELECT

to accept

the new size

The printer will first display the

TRAY 1 TYPE=xxxx

message (see

the description of that message). If you do not press any buttons in
the timeout period (about 1 minute), it displays this

TRAY 1 SIZE=

xxxx

message).

Note

Changing the size here changes the default for tray 1 paper size in
the Paper Handling Menu (see the description of “

TRAY 1 SIZE=

LETTER

” on page 210).

TRAY 1 TYPE =

[xxxx]

The printer has received a job under the three following conditions:

• the paper type requested by the job is not available in the printer

• tray 1 has been set for

CASSETTE

• paper has been placed in tray 1 (thus triggering tray 1’s paper

sensor)

If you do press any buttons, the message disappears in about 1
minute. You can take either of the following actions:

• press

S

ELECT

to accept the paper type

• press

-V

ALUE

+

to change the type and then press

S

ELECT

to accept

the new type

Note

Changing the type here changes the default for tray 1 paper type in
the Paper Handling Menu (see the description of “

TRAY 1 TYPE=

PLAIN

” on page 211).

If you do not do anything during the timeout period (about 1 minute),
the printer will print on the paper in tray 1. It will also change the default
for tray 1 paper type in the Paper Handling Menu to the type requested
by the application that sent the job.

UNABLE TO

MOPY JOB

Memory or file system failures would not allow a mopy job to occur.
Only one copy will be produced.

UNSUPPORTED SIZE

IN TRAY [yy]

An external paper handling device detected an unsupported paper
size. The printer will go offline until the condition is corrected.

USE [TYPE]

[SIZE] INSTEAD?

If the requested paper size or type is not available, the printer asks if
it should use another paper size or type instead.

Press

-V

ALUE

+

to scroll through the available types and sizes. Press

S

ELECT

to accept the alternate type or size.

Printer messages (continued)

Message

Explanation or recommended action

This manual is related to the following products: