HP 4100TN - Manual (Page 213)

EN Paper Handling Menu 211
TRAY 1 TYPE=
PLAIN
For supported
paper types, see
“Supported
types of paper”
on page 192. This item appears only when
TRAY 1 MODE=
CASSETTE
. Set the value to correspond with
the paper type currently loaded in tray 1.
TRAY 2 TYPE=
PLAIN
For supported
paper types, see
“Supported
types of paper”
on page 192. Set the value to correspond with the paper type
currently loaded in tray 2.
TRAY 3 TYPE=
PLAIN
For supported
paper types, see
“Supported
types of paper”
on page 192. This item appears only when an optional third
paper tray is installed. Set the value to
correspond with the paper type currently
loaded in tray 3.
TRAY 4 TYPE=
PLAIN
For supported
paper types, see
“Supported
types of paper”
on page 192. This item appears only when an optional fourth
paper tray is installed. Set the value to
correspond with the paper type currently
loaded in tray 4.
MANUAL FEED=OFF OFF
ON
Feed the paper manually from tray 1, rather
than automatically from a tray. When
MANUAL FEED=ON
and tray 1 is empty, the
printer goes offline when it receives a print job
and displays
MANUALLY FEED [PAPER SIZE]
.
For more information, see “Manually feeding
paper from tray 1” on page 71.
DUPLEX=OFF OFF
ON
This item appears only when an optional
duplexer is installed. Set the value to
ON
to print
on both sides (duplex) or
OFF
to print on one
side (simplex) of a sheet of paper.
For more information, see “Printing both sides
of paper (optional duplexer)” on page 49.
BINDING=
LONG EDGE
LONG EDGE
SHORT EDGE
This item appears only when an optional
duplexer is installed and the duplex option is
on. Choose the binding edge when duplexing
(printing on both sides of paper).
For more information, see “Layout options for
printing both sides of paper” on page 52.
Paper Handling Menu (continued)
Item Values Explanation