HP 4100TN User Manual
Page 151
EN
Troubleshooting optional HP Fast InfraRed Receiver problems 149
The print job has been
properly sent, but the
printer will not print.
If the connection is broken before the entire print job has been
transmitted to the printer (printing has not yet started), the printer
may not print any of the job. Press
C
ANCEL
J
OB
to clear the printer’s
memory. Then, reposition the portable device within the range of
operation described in the user guide for the HP Fast InfraRed
Receiver, and print the job again.
The FIR status
indicator turns off
during transmission.
The connection might have been broken. Press
C
ANCEL
J
OB
to clear
the printer’s memory. Then, reposition the portable device within
the range of operation described in the user guide for the HP Fast
InfraRed Receiver, and print the job again.
Troubleshooting HP Fast InfraRed Receiver problems (continued)
Item
Explanation