Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 99)

99 EN
Shooting
2
Setting the saving method for shooting data ( K Save Settings)
Choose how the camera stores pictures when two memory cards are inserted.
1 Press the Q button to display the LV super control
panel.
2 Use FGHI to select [ K Save Settings].
sRGB
Natural
S
Normal
WB
Auto
ISO
Auto
M-IS
± 0
A ± 0
± 0 ± 0
± 0
G ± 0
P 250
1023
1:02:03
F5.6
p
# ± 0.0
#
o S-IS Auto
30p 30p
4K Y F
Y F
S-AF
100 %
Off
K Save Settings
K Save Settings
3 Use the front dial to select an option.
y Standard
Pictures are recorded to the memory card in the slot selected for
[
K Save Slot] (P. 237). Shooting ends when the card is full.
z Auto Switch
Pictures are recorded to the memory card in the slot selected
for [
K Save Slot] (P. 237). Pictures will be recorded to the
remaining card when the card in the selected slot fi lls. This
setting automatically reverts to [Standard] when only one
memory card is inserted.
1
Dual
Independent
1
Each picture is recorded twice, once in each of two different
image quality formats. Choose an image quality for each slot
(P. 100). Shooting ends when either card is full. Image quality is
set separately for each slot; after changing the option selected,
check the current image quality setting.
2
Dual
Independent
3
Each picture is recorded twice, once in each of two different
image quality formats. Choose an image quality for each slot
(P. 100). Recording continues to the card in the remaining slot
when either card
fi lls. Image quality is set separately for each
slot; after changing the option selected, check the current image
quality setting.
3 Dual Same 1
Each picture is recorded twice, once to each card, using the
option currently selected for image quality. Shooting ends when
either card is full. This setting automatically reverts to [Standard]
when only one memory card is inserted.
4 Dual Same 3
Each picture is recorded twice, once to each card, using the
option currently selected for image quality. Recording continues
to the card in the remaining slot when either card
fi lls. This
setting automatically reverts to [Standard] when only one
memory card is inserted.
• If you press the Q button, you can specify the card to record the shooting data to with
[Card Slot Settings] of G Custom Menu Y (P. 237).
• The image quality mode may change if you change the option selected for [ K Save
Settings] or replace a memory card with one that can contain a different amount of
additional photographs. Check the image quality mode before taking photographs.