Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 53)

53 EN
Shooting
2
7 Adjust aperture.
• At default settings, aperture can be adjusted using the
front dial.
BULB F5.6
ISO
200
1023
1:02:03 B
30p 30p
4K
S-IS OFF S-IS OFF
Y F Y F
100 %
G
Aperture
8 Take pictures.
• In bulb and live bulb modes, keep the shutter button pressed. The exposure ends
when the button is released.
• In time and live time modes, press the shutter button all the way down once to start
the exposure and again to end it.
• The exposure ends automatically when the time selected for [Bulb/Time Timer] is
reached. The default is [8 min]. The time can be changed. g G Custom Menu
U > [Bulb/Time Timer] (P. 192)
• [Noise Reduct.] is applied after shooting. The display shows the time remaining until
the process is complete. You can choose the conditions under which noise reduction
is performed (P. 192).
• During live time photography, you can refresh the preview by pressing the shutter button
halfway.
• Some limitations apply to the choice of ISO sensitivity settings available.
• Bulb photography is used in place of live bulb photography when multiple exposure,
keystone compensation, or fi sheye correction is in effect.
• Time photography is used in place of live time photography when multiple exposure,
keystone compensation, or fi sheye correction is in effect.
• During shooting, there are limits on the settings for the following functions.
Sequential shooting, self-timer shooting, time lapse shooting, AE bracket shooting,
image stabilizer,
fl ash bracketing, focus bracketing, multiple exposure, etc.
• [ K Image Stabilizer] (P. 97) turns off automatically.
• Depending on camera settings, the temperature, and the situation, you may notice noise
or bright spots in the monitor. These may sometimes appear in pictures even when [Noise
Reduct.] (P. 192) is enabled.
%
• Starry sky AF can be used for shots of the night sky. g “Choosing a focus mode (AF
Mode)” (P. 64), G Custom Menu I > [Starry Sky AF Setting] (P. 184)
• Display brightness can be adjusted during bulb/time photography. At default settings, the
display is darker than normal. g G Custom Menu U > [Bulb/Time Monitor] (P. 192)
• During bulb/time photography, the brightness of the subject in the display is enhanced for
ease of viewing when lighting is poor. You can choose whether to prioritize display quality
or display speed.
g G Custom Menu Q > [Live View Boost] (P. 188)
• In mode B (bulb), you can adjust focus manually while the exposure is in progress.
This allows you to defocus during the exposure or focus at the end of the exposure.
g G Custom Menu I > [Bulb/Time Focusing] (P. 216)