Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 267)

267 EN
Connecting the Camera to External Devices
5
6 If the camera is able to connect, the network will be displayed with a check
(
v ) next to the network name.
• Password-protected networks are indicated by a t icon.
• If the camera has been paired with more than one computer, you will be prompted to
choose a computer before the network is displayed. Highlight the desired computer
using the
FG buttons and press the Q button.
• The camera can be used only with the selected computer. To select a different
computer, you must fi rst terminate the current connection.
• If the connection fails, the camera will display a
message to that effect, followed by the options shown in
Step 5. Repeat Steps 5–6.
100 %
w w
Connection failed
7 Press the Q button to exit to the shooting display.
• Standard shooting indicators will be displayed. A w
icon will appear in the monitor.
w icon
ISO-A
200
1023
1:02:03 P
S-IS AUTO S-IS AUTO
250 F5.6 0.0
30p 30p
4K
Y F Y F
w w
100 %
$ Connecting to Previously-Selected Networks
• The camera will automatically reconnect to previously-selected networks when you
select [Access Point Connection] via the V icon. You will not be required to supply a
password.
• If multiple networks are available, the camera will connect fi rst to the most recently-used
network.
• Once the camera has connected, it will display a list of available networks with the current
network shown by a check mark v .
• To connect to a different network, highlight it in the list and press the Q button.
• If the camera has been paired with more than one computer on the network, you will be
prompted to choose a computer before the network list is displayed. Highlight the desired
computer using the
FG buttons and press the Q button.