Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 97)

97 EN
Shooting
2
Reducing camera shake (Image Stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magni
fi cation.
1 Press the Q button to display the LV super control
panel.
2 Use FGHI to select the image stabilizer.
K Image Stabilizer
sRGB
Natural
S
Normal
WB
Auto
ISO
Auto
M-IS
± 0
A ± 0
± 0 ± 0
± 0
G ± 0
P 250 1023
1:02:03
F5.6
p
# ± 0.0
#
o S-IS Auto
30p 30p
4K Y F
Y F
S-AF
100 %
Off
K Image Stabilizer
n Image Stabilizer
3 Use the front dial to select an option.
Still
picture
(S-IS)
S-IS Off Still-I.S. Off
Image stabilization disabled. Select this option when
using a tripod.
S-IS
AUTO
Auto I.S.
Image stabilization applies to motion on all axes.
If panning motion is detected, the camera will
automatically suspend image stabilization on that
axis.
S-IS 1
All Direction
Shake I.S.
Image stabilization applies to motion on all axes.
S-IS 2
Vertical Shake
I.S. Image stabilization applies to vertical motion. Use
when panning the camera horizontally.
S-IS 3
Horizontal
Shake I.S. Image stabilization applies to horizontal motion. Use
when panning the camera vertically.
Movie
(M-IS)
M-IS Off Movie-I.S. Off Image stabilizer is off.
M-IS 1
All Direction
Shake I.S. Electronic image stabilization combined with VCM-
controlled image sensor movement.
M-IS 2
All Direction
Shake I.S.
VCM-controlled image sensor movement only.
• Image stabilization may be unable to compensate for excessive camera motion or very
slow shutter speeds. Use a tripod in these cases.
• You may notice noise or vibration while image stabilization is in effect.
• The setting selected with the lens image stabilization switch, if any, takes priority over that
selected with the camera.
• [S-IS AUTO] functions as [S-IS 1 ] when [On] is selected for [Lens I.S. Priority].
%
• You can choose whether image stabilization will be performed while the shutter button is
pressed halfway. g G Custom Menu O > [Half Way Rls With IS] (P. 186)
• You can prioritize lens image stabilization. g G Custom Menu O > [Lens I.S. Priority]
(P. 186)