Shooting – Olympus OM-D E-M1 Mark III Mirrorless Camera User Manual
Page 119
119
EN
Shooting
2
Role
Function
Custom Mode
C1–C4
Recall settings for the selected custom mode. Press the control
once to recall saved settings, a second time to restore the settings
previously in effect (P. 58). The control continues to perform this
function when a custom mode is selected with the mode dial.
• This role is available for [
K
Button Function] only.
Exposure
F
(
F
)
Adjust exposure settings. Hold the control and rotate the front or
rear dial. Alternatively, you can press the button to activate settings
and then rotate the dials. The adjustments available vary with the
shooting mode:
[P]: Use the front or rear dial or
HI
on the arrow pad for exposure
compensation. Use the
FG
buttons for program shift.
[A]: Use the front or rear dial or
HI
on the arrow pad for exposure
compensation. Use the
FG
buttons for aperture.
[S]: Use the front or rear dial or
HI
on the arrow pad for exposure
compensation. Use the
FG
buttons for shutter speed.
[M] *: Use the rear dial or
FG
on the arrow pad for shutter speed.
Use the front dial or the
HI
buttons for aperture.
[B]: Use rear dial or
FG
on the arrow pad to switch between bulb/
time and live composite photography. Use the front dial or
HI
buttons to choose the aperture.
* For information on adjusting exposure settings when [AUTO]
is selected for [ISO] (P. 75, 91), see “Adjusting Exposure
Compensation” (P. 68).
Digital Tele-
converter
(
b
)
Turn the digital teleconverter on or off (P. 143). Press once to zoom
in and again to zoom out.
Keystone Comp.
(
D
)
Press the control to view keystone compensation settings (P. 156).
After adjusting settings, press the control again to exit. To cancel
keystone compensation, press and hold the control.
• This role is available for [
K
Button Function] only.
Fisheye
Compensation
(
A
)
Enable
fi
sheye correction (P. 242). Press once to enable
fi
sheye
correction. Press again to disable. Hold the button and rotate the
front or rear dial to choose from [Angle] options 1, 2, and 3.
• This role is available for [
K
Button Function] only.
Magnify
(
a
)
Press the control once to display the zoom frame and again to zoom
in (P. 73). Press the control a third time to exit zoom; to hide the
zoom frame, press and hold the control. Use the multi selector, touch
controls, or the arrow pad (
FGHI
) to position the zoom frame.