Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 143)

143 EN
Menu functions (Shooting menu)
4
Digital Zoom (Digital Tele-converter)
This option takes a crop at the center of the frame the same dimensions as the size
option currently selected for image quality and zooms it in to
fi ll the display. The zoom
ratio increases by about 2×. This allows you to zoom in past the lens’ maximum focal
length, making it a good choice when you are unable to switch lenses or
fi nd it dif fi cult
to get any closer to your subject.
1 Select [Digital Tele-converter] in W Shooting Menu 1, and press the Q
button.
2 Highlight [On], and press the Q button.
3 Press the MENU button to exit the menus.
• When [On] is selected, the zoom ratio increases by 2×
and a H icon is displayed. Pictures will be recorded at
the new zoom ratio.
Digital teleconverter
ISO-A
200
1023
1:02:03 P
S-IS AUTO S-IS AUTO
250 F5.6 0.0
30p 30p
4K
Y F Y F
100 %
• The digital teleconverter cannot be used with multiple exposure, keystone compensation,
or, fi sheye correction.
• This function is not available when [Movie 6 ] is assigned to a button using the
[ n Button/Dial/Lever] > [ n Button Function] option (P. 116, 163) in the video menu.
• JPEG images are recorded at the selected zoom ratio. In the case of RAW images, a
frame shows the zoom crop. A frame showing the zoom crop is displayed on the image
during playback.
• During zoom, the size of the AF targets increases and their number decreases.
%
• [Digital Tele-converter] can be assigned to a button. You then need only press the button
to enable it. g “Assigning functions to buttons (Button Function)” (P. 116)