Shooting – Olympus OM-D E-M1 Mark III Mirrorless Camera User Manual
Page 118
118
EN
Shooting
2
Role
Function
k
(one-touch
white balance)
Measure a value for one-touch white balance (P. 94, 95).
To measure white balance during still photography, frame a reference
object (a piece of white paper or the like) in the display, then press
and hold the control and press the shutter button. A list of one-touch
white balance options will be displayed, from which you can choose
the location to which the new value will be saved.
To measure white balance during movie recording, frame a reference
object (a piece of white paper or the like) in the display and press the
button. A list of one-touch white balance options will be displayed,
from which you can choose the location to which the new value will
be saved.
AF Area Select
(
N
)
You can choose the AF-target mode (P. 69) and position (P. 72).
Press the control to view the AF-target selection display.
Use the front or rear dial to choose AF-target mode and the multi
selector or arrow pad to position the AF target.
• You can choose the controls used for this operation.
g
G
Custom Menu
K
> [
N
Select Screen Settings] (P. 207)
N
Home
(AF home position)
(
N
H
)
Recall previously-saved [AF Mode], [AF Target Mode], and [AF
Target Point] “home position” settings. Press the control to recall
saved settings and press it again to restore the settings previously
in effect. Home position settings are saved using [
N
Set Home] in
G
Custom Menu
K
(P. 206).
• This role is available for [
K
Button Function] only.
• You can save separate home positions for landscape and portrait
orientations using [
K
Orientation Linked
N
] (P. 210) in
G
Custom Menu
K
.
MF
(AF/MF toggle)
Switch between AF and MF. Press once to select MF and again to
return to the previous mode. The focus mode can also be selected by
holding the button and rotating a dial.
This option will have no effect during still photography if [mode2] is
selected for [
K
Fn Lever Function] (P. 219).
It will likewise have no effect during movie recording if [mode2] is
selected for [
n
Fn Lever Function] (P. 163).
RAW
K
(RAW quality)
Switch between RAW + JPEG and JPEG [
K
K
] settings. Press the
control to switch from RAW or JPEG to RAW + JPEG or from RAW +
JPEG to JPEG. You can also choose an image quality setting by
holding the button and rotating a dial.
• This role is available for [
K
Button Function] only.
Test Picture
(
K
TEST
)
Take a test shot. You can view the effects of selected settings in an
actual photograph. If you keep the control pressed while pressing the
shutter button, you will be able to view the results but the picture will
not be saved to the memory card.
• This role is available for [
K
Button Function] only.