Olympus OM-D E-M1 Mark III Mirrorless Camera - Manual (Page 255)

255 EN
Connecting the Camera to External Devices
5
Ending the Connection
End the connection to the smartphone. The camera uses Wi-Fi and Bluetooth ® when
connecting to smartphones. The use of these features may be prohibited in some
countries or regions, in which case they should be disabled.
 Ending the Current Connection
1 Use the [Power Off] slider in the OI.Share or
OI.Track settings dialog.
• Alternatively, you can press the camera MENU button
and tap [Disconnect] in the monitor.
100 %
w 1 w 1
Connect to a device.
Device Connection
Disconnect
Disconnect MENU button
E-M1MarkIII
2 Select [Off] for [Power-off Standby] to disable the “auto upload while off”
feature.
• MENU button e setup menu [Wi-Fi/Bluetooth Settings] [Power-off
Standby] [Off]
 Disabling Wi-Fi/Bluetooth ®
1 Press the MENU button to display the menus.
2 Highlight [Wi-Fi/Bluetooth Settings] in the e setup
menu and press I on the arrow pad. 1
2
j ±0 k ±0
100 %
Off
English
s
W
X Settings
Card Setup
Rec View
Wi-Fi/Bluetooth Settings
Firmware
Back Set
Setup Menu
3 Highlight [Availability] using the FG buttons and
press the I button.
Connection Password
Power-off Standby
RAW+JPEG
h
Availability On
Off
JPEG
Wi-Fi/Bluetooth Settings
100 %
Wi-Fi MAC Address
Reset Settings
Back Set
4 Highlight [Off] using the FG buttons and press the
Q button.
100 %
Back Set
Off
Wi-Fi/Bluetooth is completely
deactivated and a connection
cannot be initiated.
Availability