ProSoft Technology MVI56-AFC - Manual (Page 261)

MVI56-AFC ♦ ControlLogix Platform Diagnostics and Troubleshooting
Liquid and Gas Flow Computer User Manual
ProSoft Technology, Inc. Page 261 of 316
February 25, 2011
Alarm Message Description Solution
Reference density
error
The density correction calculation
resulted in an error according to the
standard.
Alarm Code values::
0 = No alarm
1 = Low density (NGLs), input
outside API range
2 = High density (crudes & refined),
input outside API range
3 = Non-convergence
4 = Zero VCF
5 = Temperature above critical point
6 = Input density outside reference
fluid adjusted range
7 = Corrected density out of range
8 = Standard density input outside
API range
9 = Alpha input outside API range
Also check the input values and
calculation parameters for your
project.
Temperature
Correction error
The temperature correction
calculation OR the water temperature
correction calculation resulted in an
error according to the standard.
Alarm Code values:
0 = No alarm
1 = Low density (NGLs), input
outside API range
2 = High density (crudes & refined),
input outside API range
5 = Temperature above critical point
9 = Alpha input outside API range
Also see the Alarm Code for Water
Temperature Correction error.
Vapor pressure error The vapor pressure calculation
resulted in an error according to the
standard.
Alarm Code values:
0 = No alarm
1 = Expected vapor pressure above
range of TP-15 (stream's "Default
Vapor Pressure" is substituted)
2 = Vapor pressure > measured
static absolute pressure (vapor
pressure assumed to equal static
pressure)
3 = Both 1 and 2
Water Temperature
error (Alarm Code
only)
The water temperature correction
calculation resulted in an error
according to the standard. This Alarm
Code sets the "Temperature
Correction error" alarm bit.
Alarm Code values:
0 = No alarm
1 = Temperature < 0°C (32°F) or
> 138°C (280°F)