ProSoft Technology MVI56-AFC User Manual
Page 229
MVI56-AFC ♦ ControlLogix Platform
MVI56-AFC Sample Logic
Liquid and Gas Flow Computer
User Manual
ProSoft Technology, Inc.
Page 229 of 316
February 25, 2011
The following is an example for Meter 1:
12.3.8 Meter Signals
Command
Use this Controller Tag
Description
Enable
AFC56.MeterSignals.Enable
This value should be set as 1 in order to
enable the command. If this value is 0 the
module will ignore the reset commands
from the ladder
Select Meter
AFC56.MeterSignals.Meter
Select the meter number (1 to 16) for the
reset command
Select Action
AFC56.MeterSignals.Action
Select the action to execute (Select
Stream or Reset Resettable Accumulator)
Select Signals
AFC56.MeterSignals.Signals
AFC56.MeterSignals.ResetOnce
AFC56.MeterSignals.LastBlockID
Note: The AFC56.MeterSignals.BID and AFC56.MeterSignals.Action tags are automatically
updated by the ladder logic so you do not have to enter any value for this tag.
The following illustration shows the meter signals data structure.