KEPCO KLP Series User Manual, Rev 4 - Manual (Page 17)

KLP 091313
1-5
OUTPUT CHARACTERISTICS - CONTINUED
Transient recovery
for load change excursion 1% of Emax 50% load step 2A/microsecond max.
recovery 2 msec Return to 0.1% of setting.
Turnon/turnoff overshoot 2% Rated output, any load
Rise Time Voltage 10V, 20V, 36V: 30 msec, 75V: 40 msec,
150V: 50 msec, 300V: 60 msec,
600V: 75 msec
0 - Emax, rated load (resistive)
Current 10V, 20V, 36V: 30 msec, 75V: 40 msec,
150V: 50 msec, 300V: 60 msec
600V: 75 msec
0 - Imax, rated load (resistive)
Fall Time Voltage no load 10V: 475 msec, 20V: 525 msec,
36V: 825 msec, 75V: 2820 msec,
150V: 4850 msec, 300V: 4400 msec,
600V: 3150 msec,
Emax - 0, no load (open circuit).
NOTE: For improved performance, see
RODC option (PAR. 1.3.1).
Voltage rated load 10V, 20V, 36V: 30 msec, 75V: 40 msec,
150V: 50 msec, 300V: 60 msec
600V: 75 msec
Emax - 0, rated load (resistive)
Current 10V, 20V, 36V: 30 msec, 75V: 40 msec,
150V: 50 msec, 300V: 60 msec
600V: 75 msec
Imax - 0, rated load (resistive)
Overvoltage protection voltage 20-120% of Emax Programmable; see PAR. 3.2.11.
Selectable Recovery Mode (see PAR.
3.2.17.3.2
Overcurrent protection current 72-120% of Imax
Output Load wire protection Shutdown Selectable Recovery Mode (see PAR.
3.2.17.3.2
Parallel operation Active load sharing within 5% of Io rated Up to 5 units, maximum.
GENERAL (ENVIRONMENTAL) SPECIFICATIONS
Temperature operating -10 to +50°C Rated load.
+50°C to +70°C Derate current 3% per °C from 50°C to
70°C.
storage -40°C to +85°C
Overtemperature protection Shutdown See PAR. 3.2.17.3.2.
Cooling 3 internal d-c fans exhaust to the rear
Humidity 0 to 95% RH non-condensing
Shock 20g, 11msec +/- 50% half sine non-operating
Vibration 5 -10 Hz 10mm double amplitude 3-axes, non-operating
10-55 Hz 2g 3-axes, non-operating
Altitude sea level to 10000 ft. 0-3,000 ft: 100%, linear derating to 70%
of power at 10,000ft.
Loss of source power protection Shutdown Selectable Recovery Mode (see PAR.
3.2.17.3.2).
Overtemperature protection Shutdown
Fan failure protection Shutdown
TABLE 1-3. KLP SPECIFICATIONS (Continued)
SPECIFICATION RATING/DESCRIPTION CONDITION/COMMENT