KEPCO KLP Series User Manual, Rev 4 - Manual (Page 15)

KLP 091313
1-3
FIGURE 1-2. KLP OPERATING REGIONS
TABLE 1-2. MODEL PARAMETERS
Model number
Rated
Voltage
Range
(1)
Maximum
current for
rated voltage
Minimum
Programmable
current
Rated
Current
Range
(1)
Maximum
voltage for
rated current
Ripple and
noise
p-p
(2)
Efficiency
@115 Va-c
KLP 10-150
(3)
0-10V 120A@10V 1.9A 0-150A 8V@150A 60 mV 80%
KLP 20-120
(3)
0-20V 60A@20V 1.5A 0-120A 10V@120A 60 mV 82%
KLP 36-60
(3)
0-36V 33.3A@36V 0.8A 0-60A 20V@60A 60 mV 83%
KLP 75-33
(3)
0-75V 16A@75V 0.4A 0-33.3A [email protected] 60 mV 84%
KLP 150-16
(3)
0-150V 8A@150V 0.2A 0-16A 75V@16A 125 mV 86%
KLP 300-8
(3)
0-300V 4A@300V 0.1A 0-8A 150V@8A 150 mV 87%
KLP 600-4
(3)
0-600V 2A@600V 0.05A 0-4A 300V@4A 150 mV 88%
(1) The maximum current and voltage are constrained by the 1200 watt power limitation, see Figure 1-2.
(2) Bandwidth: 20MHz; low frequency ripple may be higher at loads less than 30 Watts.
(3) Specifications listed apply to both standard and E-Series (suffix E) models.