To connect to power, To connect to power -16 – RIGOL DG4000 Series User Manual
Page 40
DG4000 Series User’s Guide
1-16
To Connect to Power
DG4000 accepts AC power supply: 100 to 240V, 45Hz to 440Hz. Please use the
power cable provided in the accessories to connect the instrument to AC power (as
shown in Figure 1-7). At this point, the generator is powered on and the power
button at the lower-left corner of the front panel is in breathing state.
Figure 1-7 To Connect to Power
CAUTION
If the power fuse needs to be changed, please return the instrument back
to our factory and the
RIGOL authorized operator will change it for you.