RIGOL DG4000 Series - Manual (Page 226)

RIGOL Chapter 13 Specifications
DG4000 Series User’s Guide 13-4
Offset (into 50 Ω)
Range
±5Vpk ac + dc
Accuracy ±(1% of setting + 5mV + 0.5% of amplitude)
Waveform Output
Impedance
50Ω (Typical)
Protection Short-circuit protection, automatically disable waveform output
when overload occurs
Modulation Characteristics
Modulation Type
AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM
AM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Depth 0% to 120%
Modulating Frequency 2mHz to 50KHz
FM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Modulating Frequency 2mHz to 50KHz
PM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Phase Deviation 0° to 360°
Modulating Frequency 2mHz to 50KHz
ASK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
FSK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle