RIGOL DG4000 Series User Manual
Page 151
DG4000 Series User’s Guide
7-5
of the selected waveform. For Noise waveform, the output will stop immediately
once the gated signal becomes “False”.
Gated Burst could only be triggered by “Ext” trigger source. Users can also set the
“Start Phase”.
When Burst is enabled, press Type to select “Gated” and then press Polarity to
set the gated polarity as “Pos” (or “Neg”). The generator outputs burst waveform
only when the gated signal is positive.
Figure 7-3 Gated Burst