RIGOL DG4000 Series - Manual (Page 191)

Chapter 10 Utility and System Settings RIGOL
DG4000 Series User’s Guide 10-19
Language
At present, DG4000 supports simplified Chinese and English system languages,
including Chinese/English menu, help information, prompt messages, interface
display and Chinese/English input method.
Press Utility  System  Language to select the desired language. This
setting is stored in non-volatile memory and will not be influenced by “Preset”.
Power On Setting
Set the configuration to be used when the instrument is powered on the next time
to “Default” or “Last”. The default setting is “Default”.
 Last: include all the system parameters, except output configuration, clock
source.
 Default: denote the factory default except some parameters (such as:
Language).
Press Utility  System  PowerOn to select the desired configuration type.
This setting is stored in non-volatile memory and will not be influenced by “Preset”.
Power Setting
Set the start-up mode when the generator is powered on to “Auto” or “Manual”
and the default is “Auto”.
 Auto: the instrument starts automatically after power-on.
 Manual: users need to press the power switch at the front panel to start the
instrument after power-on.
Press Utility  System PowerSet to select the desired type.